SAFETY DATA sheet

 

SECTION 1: Identification of the substance/ mixture and of the company/ undertaking

1.1 Product Identifier

PRODUCT NAME: Brill Cleaner

1.2 Relevant identified uses of the substance or mixture and uses advised against

Use of substance/ mixture: NON CAUSTIC MULTI PURPOSE HARD SURFACE CLEANER

1.3 Details of the supplier of the safety data sheet

Company Name: BRILLCLEANER. 'Wagtails', Central Avenue, Stanford Le Hope, Essex, SS17 8HQ.

Tel: +00 44 1375 643453

Email: sales@brillcleaner.com

 

SECION 2: Hazards identification

2.1 Classification of the substance of mixture

Classification under CLP: Eye Irrit. 2: H319; Skin Irrit. 2: H315

Most important adverse effects: Causes skin irritation. Causes serious eye irritation.

2.2 Label elements

Hazard statements: H315: Causes skin irritation. H319: Causes serious eye irritation.

Signal words: Warning

Hazard pictograms: GHS07: Exclamation mark

(inset pictogram)

Precautionary statements: 

P264: Wash hands thoroughly after handling.

P280: Wear protective gloves/ protective clothing/ eye protection/ face protection.

P302+352: IF ON SKIN: Wash with plenty of water.

P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P321: Specific treatment (see instructions on this label).

P332+313: If skin irritation occurs: Get medical attention.

2.3 Other hazards

PBT: This product is not identified as a PBT/vPvB substance.

 

Section 3: Composition/ information on ingredients

3.2 Mixtures

Hazardous ingredients:

DISODIUM METASILICATE

EINECS: 229-912-9

CAS: 6834-92-0

PBT/WEL: -

CLP Classificaiton: Skin Corr. 1B: H314; STOT SE 3: H335

Percent: 1-5%

2-BUTOXYETHANOL

EINECS: 203-905-0

CAS: 111-76-2

PBT/ WEL: -

CLP Classificaiton: Acute Tox. 4: H332; Acute Tox. 4: H312; Acute Tox. 4: H302; Eye Irrit. 2: H319; Skin Irrit. 2: H315

Percent: 1-5%

 

Section 4: Fist aid measures

4.1 Description of first aid measures

Skin contact: Remove all contaminated clothes and footwear immediately unless stuck to skin. Wash immediately with plenty of soap and water.

Eye contact: Bathe the eye with running water for 15 minutes. Consult a doctor.

Ingestion: Wash out mouth with water. Consult a doctor.

Inhalation: Remove casualty from exposure ensuring ones own safety whilst doing so. Consult a doctor.

4.2 Most important symptoms and effects, both acute and delayed

Skin contact: There may be irritation and redness at the site of contact.

Eye contact: There may be irritation and redness. The eyes may water profusely.

Ingestion: There may be soreness and redness of the mouth and throat.

Inhalation: There may be irritation of the throat with a feeling of tightness in the chest. Exposure may cause coughing or wheezing.

Delayed/ immediate effects: Immediate effects can be expected after short-term exposure.

4.3 Indication of any immediate medical attention and special treatment needed

Immediate/ special treatment: Eye bathing equipment should be available on the premises.

 

Section 5: Fire- fighting measures

5.1 Extinguishing media

Extinguishing media: Suitable extinguishing media for the surrounding fire should be used. Use water spray to cool containers.

5.2 Special hazards arising from the substance or mixture

Exposure hazards: In combustion emits toxic fumes.

5.3 Advice for fire-fighters

Advice for fire-fighters: Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.

 

Section 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Personal precautions: Refer to section 8 of SDS for personal protection details. If outside do not approach from downwind. If outside keep bystanders upwind and away from danger point. Mark out the contaminated area with signs and prevent access to unauthorised personnel. Turn leaking containers leak-side up to prevent the escape of liquid.

6.2 Environmental precautions

Environmental precautions: Do not discharge into drains or rivers. Contain the spillage using bunding.

6.3 Methods and material for containment and cleaning up

Clean up procedures: Absorb into dry earth or sand. Transfer to closable, labelled salvage container for disposal by an appropriate method.

6.4 Reference to other sections

Reference to other sections: Refer to action 8 of SDS.

 

Section 7: HANDLING AND STORAGE

7.1 Precautions for safe handling

Handling requirements: Avoid direct contact with substance. Ensure there is sufficient ventilation of the area. Do not handle in a confined space. Avoid the formation or spread of mists in the air.

7.2 Conditions for safe storage, including any incompatibilities

Storage conditions: Store in a cool, well ventilated area. Keep container tightly closed.

7.3 Specific end use(s)

Specific end use(s): No data available.

 

section 8: exposure controls/ personal protection

8.1 Control parameters

Hazardous ingredients:

2-BUTOXYETHANOL

Workplace exposure limits: 

State: UK

8 hour TWA: 25 ppm

15 min. STEL: 50 ppm

Respirable dust

8 hour TWA: -

15 min. STEL:-

DNEL/ PNEC Values

DNEL/ PNEC: No data available

8.2 Exposure controls

Engineering measures: Ensure there is sufficient ventilation of the area.

Respiratory protection: Self-contained breathing apparatus must be available in case of emergency.

Hand protection: Protective gloves.

Eye protection: Safety glasses. Ensure eye bath is to hand.

Skin protection: Protective clothing.

 

Section 9: Physical and chemical properties

9.1 Information on basic physical and chemical properties

State: Liquid

Colour: Yellow

Viscosity: Non-viscous

9.2 Other information

Other information: No data available.

 

Section 10: Stability and reactivity

10.1 Reactivity

Reactivity: Stable under recommended transport or storage conditions.

10.2 Chemical stability

Chemical stability: Stable under normal conditions.

10.3 Possibility of hazardous reactions

Hazardous reactions: Hazardous reactions will not occur under normal transport or storage conditions. Decomposition may occur on exposure to conditions or materials listed below.

10.4 Conditions to avoid

Conditions to avoid: Heat.

10.5 Incompatible materials

Materials to avoid: Strong oxidising agents. Strong acids.

10.6 Hazardous decomposition products

Haz. decomp. products: In combustion emits toxic fumes.

 

Section 11: Toxicological information

11.1 Information on toxicological effects

Hazardous ingredients:

DISODIUM METASILICATE

ORL - MUS - LD50 - 770 - mg/kg

ORL - RAT - LD50 - 1153 - mg/kg

2- BUTOXYETHANOL

IVN - RAT - LD50 - 307 - mg/kg

ORL - MUS - LD50 - 1230 - mg/kg

ORL - RAT - LD50 - 470 - mg/kg

Relevant hazards for substance:

Hazard: Skin corrosion/ irritation. Route: DRM. Basis: Hazardous: calculated

Hazard: Serious eye damage/ irritation. Route: OPT. Basis: Hazardous: calculated

Symptoms/ routes of exposure

Skin contact: There may be irritation and redness at the site of contact.

Eye contact: There may be irritation and redness. The eyes may water profusely.

Ingestion: There may be soreness and redness of the mouth and throat.

Inhalation: There may be irritation of the throat with a feeling of tightness in the chest. Exposure may cause coughing or wheezing.

Delayed/ Immediate effects: Immediate effects an be expected after short-term exposure.

 

Seciton 12: Ecological information

12.1 Toxicity

Ecotoxicity values: No data available.

12.2 Persistence and degradability

Persistence and degradability: Biodegradable

12.3 Bioaccumulative potential

Bioaccumulative potential: No bioaccumulative potential.

12.4 Mobility in soil

Mobility: Readily absorbed into soil.

12.5 Results of PBT and vPvB assessment

PBT identification: This product is not identified as a PBT/ vPvB substance.

12.6 Other adverse effects

Other adverse effects: Negligible ecotoxicity.

 

Section 13: Disposal considerations

13.1 Waste treatment methods

Disposal operations: Transfer to a suitable container and arrange for collection by specialised disposal company.

NB: The user's attention is drawn to the possible existence of regional or national regulations regarding disposal.

 

Section 14: Transport information

Transport class: This product does not require a classification for transport.

 

Section 15: Regulatory information

15.1 Safety, health and environmental regulations/ legislation specific for the substance or mixture

Specific regulations: Not applicable.

15.2 Chemical Safety Assessment

 

Section 16: Other information

Other information: This safety data sheet is prepared in accordance with Commission Regulation (EU) No 453/2010.

•indicates text in the SDS which has changed since the last revision.

Phrases used in s.2 and s.3: 

H302: Harmful if swallowed.

H312: Harmful in contact with skin.

H314: Causes severe skin burns and eye damage.

H315: Causes skin irritation.

H319: Causes serious eye irritation.

H332: Harmful if inhaled.

H335: May cause respiratory irritation.

Legal disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any damage resulting from handling or from contact with the above product.